Combination of :
WATER RING VACUUM PUMP
OIL SEALED VACUUM PUMP
STEAM EJECTORS

Maximum achievable vacuum 0.001 mm Hg Complete skid
mounted System with Instrumentation & Automation.

Widely popular now in Pharmaceutical, Chemical,
Edible Oil, Dairy, Food Processing, Fertilizer, Petrochemical Industries.

"The brand new mechanical vacuum booster system is capable of developing 1 torr to 0.5 torr vacuum. The system consists of a combination of 3 roots Mechanical Vacuum Booster and vacuum pump. The vacuum pump acts as a back-up pump. As per the requirement of the process, the vacuum pump can be water-ring or oil-sealed type vacuum pump.

The system offers three innovative combinations of Joyam's mechanical vacuum booster system, which are: Mechanical Vacuum Booster and water ring vacuum pump; Mechanical Vacuum Booster and oil sealed rotary high vacuum pumps; Mechanical Vacuum Booster , oil sealed rotary high vacuum pumps and steam ejector.

The system offers optimal performance and high volumetric efficiency at low operating cost. Like all other high quality products from Joyam, this mechanical vacuum booster system also requires zero maintenance.

This system Export to Nigeria.

Can be integrated with any installed vacuum systems such as steam ejectors, water ring pumps, oil sealed pumps and water ejectors, etc.

The vacuum booster is a dry pump, as it does not use any pumping fluid. It pumps vapor or gases with equal ease. Small amounts of condensed fluid can also be pumped.

Vacuum Boosters are power efficient. Very often a combination of vacuum booster and suitable back up pump result in reduced power consumption per unit of pumping speed. They provide high pumping speeds even at low pressures.

Boosters increase the working vacuum of the process, in most cases very essential for process performance and efficiency.

It has very low pump friction losses, hence requires relatively low power for high volumetric speeds. Typically, their speeds, at low vacuums are 20-30 times higher than corresponding vane pumps/ring pumps of equivalent power.

Vacuum boosters do not have any valves; rings, stuffing box, etc therefore do not demand regular maintenance.

Due to vapor compression action by the booster, the pressure at the discharge of booster is maintained high, resulting in advantages such as low back streaming of prime pump fluid, effective condensation even at higher condenser temperatures and improvement of the back up pump efficiency.

For Further Information, Please Contact: